分類:

描述

The products are bended by a set of bending dies, which are divided into two processes: cold-pressing and hot-pressing. No matter what kind of machinery and equipment and pipeline, most of them are used in elbows, mainly for oil, gas and liquid transfusion.

Cold-cured elbow is a method of bending at room temperature without heating or changing the material structure. It is called cold-cured elbow.

Hot-ironing elbow production technology: After the straight pipe is cut off, the induction coil is set on the bending part of the steel pipe through the elbow pusher, the pipe head is clamped by the mechanical arm, and the medium frequency electric current is introduced into the induction coil to heat the steel pipe. When the temperature of the steel pipe rises to the plastic state, the steel pipe is pushed forward by mechanical thrust at the back end of the steel pipe to bend and bend out of the steel pipe. Parts are quickly cooled with coolant, so that the bends are continuously bent out while heating, advancing, bending and cooling.

Hot-ironed bending pipe is mainly used in building arc steel structure, tunnel support, roof bending beam, Metro engineering, aluminum doors and windows, ceiling, cylindrical inner framework, balcony handrails, shower room doors, production line tracks, fitness equipment and other industries.

Material: Power plant elbows are usually made of carbon steel, alloy steel (including austenitic stainless steel), etc.

Specification scope:

The outer diameter do is less than 1220 mm.

Wall thickness S is less than 120 mm.

The bending radius R is less than 6000mm and R is more than 3Do.

The bending angle is less than 100 degrees.

Note: For elbows with R < Do or 100 < Theta < 180 the inspection standard shall be agreed by both suppliers and demanders.

Mark:

The elbow symbols marked by inside and outside diameters are as follows:

Outer Diameter * Wall Thickness – Bending Radius – Bending Angle – Material

Inner Diameter * Wall Thickness – Bending Radius – Bending Angle – Material

Our company can provide Q345B elbow 12CrMo elbow, 12CrMoV high pressure elbow, 15CrMo elbow, 16MnR elbow, 12CrMoG elbow, 15CrMoG elbow, Q345A elbow, Q345B elbow, 12Cr1MoV alloy elbow, 12Cr2MoV elbow, 12Cr2MoG elbow, A335P1 elbow, A420WPL6 elbow, 30CrMoA elbow, 10CrMo910 elbow, A335P elbow, A335P elbow. 11 elbows, A335P12 elbows, A335P22 elbows, A335P5 elbows, A335P9 elbows, 20MnMo elbows, 0Cr13 elbows, P9 elbows, WP5 elbows, WP11 elbows, WPL6 elbows, 304L stainless steel elbows, 316L stainless steel elbows, carbon steel elbows, stainless steel elbows, push elbows, extrusion elbows Pipe, galvanized elbow, 12Cr1MoV elbow, thick-walled large elbow, straight elbow, welded elbow, X65 elbow, petroleum elbow, large elbow A234WP11 elbow, A234WPB elbow, A23P91 elbow, 16Mn elbow, 90-degree elbow, 180-degree elbow, 45-degree elbow, difficult elbow customized special elbow